Mounting Clips w/ Spacer
Price range: $17.00 through $50.00
Our adhesive mounting clips are specific to the Eclipse Sun Shade and make installation a quick and easy process, no matter your vehicle.
These clips come in handy when you are replacing your windshield, but are keeping your shade! Mounting clips can also be purchased as replacements.
Choose “6 Clips” if your shade has 6 retractors
Choose “4 Clips” if your shade has 4 retractors
Mounting clips are included free with each Eclipse Sun Shade for installation. Replacements must be purchased separately.
ECLIPSE SUNSHADE – Shade Installation
ATTACH ALL MOUNTING CLIPS TO RETRACTOR
(NOTE: INSTALL SHADE AT TEMP OF 50+F)
Attach Mounting Clips
-
SEPARATE SHADE HALVES
-
“SOFT” VELCRO – DRIVER SIDE
-
“FIRM” VELCRO – PASSENGER SIDE
-
-
LEAVE ADHESIVE COVERS IN PLACE
-
CLIP ARROW POINTING DOWN
-
SLIDE FOOT INTO CLIP
-
TOP TO BOTTOM
-
-
FIRMLY PUSH TO FULL ATTACHMENT
Position Shade
A. AT LEAST ½” BELOW TOP TRIM
B. CLIPS/RETRACTORS (CLOSE TO SIDE TRIM BUT NOT TOUCHING)
C. SHADE BOTTOM CLOSE TO DASH (BUT NOT TOUCHING)
D. MARK MOUNTING CLIP POSITION (MASKING TAPE OR MARKING PEN)
Attach Shade
- KEEP CLIPS ATTACHED TO SHADE
- CLEAN GLASS MOUNTING AREA ALCOHOL SWABS PROVIDED
- REMOVE ADHESIVE COVER
- CAREFULLY ALIGN TO POSITIONS
- FIRMLY PUSH CLIPS ON WINDSHIELD
- INSPECT ADHESIVE TAPE BACK SIDE
- VIEW FROM OUTSIDE OF VEHICLE
- PRESS OUT VISIBLE AIR POCKETS
- ALLOW ADHESIVE TO CURE FOR SEVERAL HOURS BEFORE USE
Reviews
There are no reviews yet.